# text: "Acquisition Parameters for SMAD interface"
# item 4: TEXT (0x88) disabled
# bounds: x1=0 y1=113 x2=84 y2=132
# text: "One channel"
# item 5: TEXT (0x88) disabled
# bounds: x1=140 y1=113 x2=255 y2=132
# text: "Samples/second"
# item 6: TEXT (0x88) disabled
# bounds: x1=64 y1=140 x2=173 y2=156
# text: "Collect data for"
# item 7: CUSTOM (0x80) disabled
# bounds: x1=224 y1=184 x2=303 y2=210
# data: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=117 y1=83 x2=240 y2=103
# text: "Samples /second"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=57 x2=39 y2=74
# text: "0"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=40 y1=57 x2=72 y2=74
# text: "1"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=72 y1=57 x2=102 y2=74
# text: "2"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=104 y1=57 x2=134 y2=74
# text: "3"
# item 13: TEXT (0x88) disabled
# bounds: x1=84 y1=113 x2=140 y2=132
# text: "^"
# item 14: TEXT (0x88) disabled
# bounds: x1=174 y1=163 x2=241 y2=182
# text: "0"
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=177 y1=141 x2=238 y2=157
# text: "1000.000"
# item 16: CUSTOM (0x00) enabled
# bounds: x1=228 y1=34 x2=298 y2=51
# data: ""
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=141 y1=54 x2=310 y2=77
# text: "Trigger from computer"
# item 18: TEXT (0x88) disabled
# bounds: x1=153 y1=33 x2=226 y2=51
# text: "Resolution"
# item 19: CUSTOM (0x00) enabled
# bounds: x1=50 y1=83 x2=116 y2=101
# data: ""
# item 20: TEXT (0x88) disabled
# bounds: x1=10 y1=83 x2=48 y2=102
# text: "Total"
# item 21: TEXT (0x88) disabled
# bounds: x1=74 y1=180 x2=220 y2=226
# text: ""
# item 22: TEXT (0x88) disabled
# bounds: x1=241 y1=150 x2=300 y2=170
# text: "Minutes"
# item 23: TEXT (0x88) disabled
# bounds: x1=61 y1=163 x2=177 y2=182
# text: "Total data in file"
DITL_3001.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=243 y1=226 x2=314 y2=253
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=202 y1=228 x2=238 y2=251
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=114 y1=4 x2=236 y2=25
# text: "Review Settings"
# item 3: TEXT (0x88) disabled
# bounds: x1=179 y1=122 x2=215 y2=142
# text: "123"
# item 4: TEXT (0x88) disabled
# bounds: x1=180 y1=145 x2=316 y2=166
# text: "Channels to display"
# item 5: CUSTOM (0x00) enabled
# bounds: x1=65 y1=40 x2=169 y2=62
# data: ""
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=5 y1=75 x2=257 y2=95
# text: "Fit X scale in the window (or page)"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=5 y1=39 x2=60 y2=59
# text: "Scale"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=238 x2=191 y2=258
# text: "Label Channels on graph"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=132 x2=157 y2=152
# text: "Join the DATA points"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=169 y1=28 x2=248 y2=50
# text: "per Inch"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=169 y1=48 x2=296 y2=71
# text: "per Centimeter"
# item 12: TEXT (0x88) disabled
# bounds: x1=214 y1=122 x2=316 y2=142
# text: "Samples/pixel"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=162 x2=135 y2=182
# text: "Show time scale"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=189 y1=167 x2=219 y2=191
# text: "0"
# item 15: CHECKBOX (0x05) enabled
# bounds: x1=219 y1=167 x2=249 y2=191
# text: "1"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=249 y1=167 x2=279 y2=191
# text: "2"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=279 y1=167 x2=309 y2=191
# text: "3"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=192 x2=175 y2=228
# text: "Filter with a period of\n(moving average)"
# item 19: EDIT_TEXT (0x10) enabled
# bounds: x1=176 y1=200 x2=226 y2=219
# text: ""
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=65 y1=94 x2=211 y2=115
# text: "fit Y scale as well"
# item 21: TEXT (0x88) disabled
# bounds: x1=231 y1=202 x2=314 y2=221
# text: "Seconds"
DITL_3002.txt
# 1 entries
# item 0: TEXT (0x08) enabled
# bounds: x1=11 y1=12 x2=137 y2=52
# text: " Printing \nto Cancel press ‚åò."
DITL_3003.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=274 y1=264 x2=338 y2=290
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=217 y1=269 x2=241 y2=285
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=24 y1=169 x2=320 y2=237
# text: "SmadChrom is a Data acquisition program using the SMAD(][) Analog to Digital converter interface. It can replace a chart recorder/integrator for chromatography."
# item 3: PICTURE (0xC0) disabled
# bounds: x1=4 y1=0 x2=341 y2=168
# PICT resource ID: 3004
# item 4: TEXT (0x88) disabled
# bounds: x1=6 y1=237 x2=339 y2=257
# text: "^"
# item 5: BUTTON (0x04) enabled
# bounds: x1=4 y1=265 x2=141 y2=286
# text: "For further info"
DITL_3004.txt
# 20 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=173 y1=165 x2=243 y2=190
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=13 y1=154 x2=144 y2=172
# text: "Channels to Report"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=184 y1=150 x2=222 y2=171
# data: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=79 y1=1 x2=183 y2=20
# text: "Report Format"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=1 y1=21 x2=99 y2=46
# text: "Text Header"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=20 x2=255 y2=46
# text: "Chromatogram"
# item 6: CHECKBOX (0x85) disabled
# bounds: x1=426 y1=78 x2=490 y2=100
# text: "Height"
# item 7: CHECKBOX (0x85) disabled
# bounds: x1=493 y1=78 x2=549 y2=102
# text: "Area "
# item 8: CHECKBOX (0x85) disabled
# bounds: x1=344 y1=80 x2=452 y2=100
# text: "Normalise with"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=175 x2=40 y2=191
# text: "0"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=46 y1=175 x2=78 y2=191
# text: "1"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=84 y1=175 x2=116 y2=191
# text: "2"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=122 y1=175 x2=154 y2=191
# text: "3"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=51 x2=231 y2=72
# text: "Height corrected for baseline"
# item 14: BUTTON (0x04) enabled
# bounds: x1=144 y1=76 x2=252 y2=103
# text: "Add comments"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=8 y1=98 x2=68 y2=118
# text: "Area"
# item 16: RADIO_BUTTON (0x06) enabled
# bounds: x1=70 y1=98 x2=139 y2=118
# text: "Height"
# item 17: RADIO_BUTTON (0x06) enabled
# bounds: x1=1 y1=129 x2=114 y2=149
# text: "no units or"
# item 18: RADIO_BUTTON (0x06) enabled
# bounds: x1=117 y1=130 x2=255 y2=149
# text: "millivolt/seconds"
# item 19: TEXT (0x88) disabled
# bounds: x1=11 y1=80 x2=120 y2=101
# text: "Normalise with"
DITL_3005.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=283 y1=23 x2=332 y2=45
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=230 y1=16 x2=273 y2=36
# data: ""
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=12 y1=7 x2=212 y2=27
# text: "Delete ALL baseline marks"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=12 y1=31 x2=201 y2=51
# text: "Delete ALL peak marks"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=12 y1=55 x2=304 y2=75
# text: "Replace deleted record with AUTO values"
DITL_3006.txt
# 29 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=225 y1=198 x2=331 y2=225
# text: "New Report ‚åòR"
# item 1: TEXT (0x88) disabled
# bounds: x1=17 y1=188 x2=115 y2=204
# text: "Minimum area"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=221 y1=199 x2=273 y2=218
# data: ""
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=11 y1=131 x2=64 y2=151
# text: "Auto"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=63 y1=131 x2=130 y2=151
# text: "Manual"
# item 5: TEXT (0x88) disabled
# bounds: x1=279 y1=51 x2=339 y2=73
# text: "Minutes"
# item 6: TEXT (0x88) disabled
# bounds: x1=143 y1=131 x2=182 y2=151
# text: "Slope"
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=65 y1=56 x2=109 y2=74
# text: "abcde"
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=65 y1=30 x2=193 y2=50
# text: "0123456789ABCDEF"
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=249 y1=107 x2=313 y2=123
# text: "8"
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=188 y1=131 x2=233 y2=151
# text: "10"
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=146 y1=80 x2=219 y2=100
# text: "2"
# item 12: EDIT_TEXT (0x10) enabled
# bounds: x1=249 y1=80 x2=335 y2=100
# text: "3600"
# item 13: EDIT_TEXT (0x10) enabled
# bounds: x1=121 y1=188 x2=207 y2=204
# text: "0"
# item 14: EDIT_TEXT (0x10) enabled
# bounds: x1=121 y1=211 x2=207 y2=227
# text: "0"
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=257 y1=160 x2=307 y2=176
# text: "4"
# item 16: TEXT (0x88) disabled
# bounds: x1=223 y1=78 x2=243 y2=102
# text: "To"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=11 y1=157 x2=254 y2=179
# text: "Skim peaks if ratio of HEIGHT\'s ‚â•"
# item 18: RADIO_BUTTON (0x06) enabled
# bounds: x1=200 y1=4 x2=233 y2=26
# text: "0"
# item 19: RADIO_BUTTON (0x06) enabled
# bounds: x1=235 y1=4 x2=268 y2=26
# text: "1"
# item 20: RADIO_BUTTON (0x06) enabled
# bounds: x1=269 y1=4 x2=301 y2=26
# text: "2"
# item 21: RADIO_BUTTON (0x06) enabled
# bounds: x1=302 y1=4 x2=335 y2=26
# text: "3"
# item 22: TEXT (0x88) disabled
# bounds: x1=7 y1=211 x2=115 y2=227
# text: "Minimum height"
# item 23: TEXT (0x88) disabled
# bounds: x1=201 y1=51 x2=276 y2=73
# text: "Time units"
# item 24: TEXT (0x88) disabled
# bounds: x1=10 y1=106 x2=246 y2=126
# text: "Minimum peak width at half height"
# item 25: TEXT (0x88) disabled
# bounds: x1=13 y1=5 x2=198 y2=24
# text: "Analysis Settings for Channel:"
# item 26: TEXT (0x88) disabled
# bounds: x1=58 y1=79 x2=140 y2=103
# text: "Report from"
# item 27: TEXT (0x88) disabled
# bounds: x1=237 y1=132 x2=339 y2=152
# text: "Range 1-10000"
# item 28: TEXT (0x88) disabled
# bounds: x1=2 y1=25 x2=60 y2=76
# text: "Channel Name\n & Id"
DITL_3007.txt
# 12 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=199 y1=136 x2=265 y2=159
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=227 y1=78 x2=263 y2=101
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=156 y1=55 x2=197 y2=76
# text: "/unit"
# item 3: TEXT (0x88) disabled
# bounds: x1=20 y1=80 x2=59 y2=100
# text: "10"
# item 4: TEXT (0x88) disabled
# bounds: x1=49 y1=3 x2=233 y2=22
# text: "Accumulate screen display"
# item 5: CUSTOM (0x00) enabled
# bounds: x1=62 y1=55 x2=154 y2=75
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=23 y1=23 x2=266 y2=43
# text: "Displays ALL accumulating channels"
# item 7: TEXT (0x88) disabled
# bounds: x1=21 y1=54 x2=60 y2=74
# text: "Scale"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=111 x2=192 y2=135
# text: "Label Channels on graph"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=139 x2=167 y2=166
# text: "Join the DATA points"
# item 10: TEXT (0x88) disabled
# bounds: x1=60 y1=80 x2=160 y2=100
# text: "samples/pixel"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=189 x2=157 y2=210
# text: "Filter with period of"
DITL_3008.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=339 y1=145 x2=417 y2=173
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=272 y1=152 x2=303 y2=174
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=45 y1=3 x2=369 y2=25
# text: "Set Automatic Actions after Accumulating Data"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=27 x2=93 y2=51
# text: "Save data "
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=328 y1=49 x2=427 y2=73
# text: "Print report"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=3 y1=49 x2=139 y2=73
# text: "Save text report"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=142 y1=27 x2=230 y2=51
# text: "Print data"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=1 y1=84 x2=187 y2=109
# text: "Wait for the next trigger"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=186 y1=85 x2=262 y2=109
# text: "Wait for"
# item 9: EDIT_TEXT (0x90) disabled
# bounds: x1=266 y1=86 x2=331 y2=106
# text: "30"
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=154 y1=118 x2=398 y2=136
# text: ""
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=154 y1=146 x2=192 y2=166
# text: "1"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=143 y1=50 x2=328 y2=73
# text: "Put all reports in one file"
# item 13: TEXT (0x88) disabled
# bounds: x1=4 y1=115 x2=150 y2=139
# text: "Use Default File name"
# item 14: TEXT (0x88) disabled
# bounds: x1=335 y1=75 x2=426 y2=115
# text: "Seconds and\nstart again"
# item 15: TEXT (0x88) disabled
# bounds: x1=28 y1=148 x2=144 y2=169
# text: "with File count"
DITL_3009.txt
# 1 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=23 y1=12 x2=161 y2=35
# text: "Not Enough Memory "
DITL_3010.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=367 y1=155 x2=432 y2=178
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=340 y1=152 x2=361 y2=178
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=112 y1=4 x2=336 y2=25
# text: "Comments for the Report header"
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=154 x2=325 y2=178
# text: "The Top two lines are added to the Plot report"
# item 4: CUSTOM (0x80) disabled
# bounds: x1=5 y1=27 x2=443 y2=149
# data: ""
DITL_3011.txt
# 31 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=184 y1=271 x2=258 y2=297
# text: "Continue"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=141 y1=276 x2=179 y2=299
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=37 y1=4 x2=230 y2=26
# text: "Smad Interface Information"
# item 3: TEXT (0x88) disabled
# bounds: x1=11 y1=26 x2=103 y2=46
# text: "ROM version"
# item 4: TEXT (0x88) disabled
# bounds: x1=24 y1=57 x2=109 y2=76
# text: "Range mv"
# item 5: TEXT (0x88) disabled
# bounds: x1=166 y1=58 x2=230 y2=77
# text: "Offset %"
# item 6: TEXT (0x88) disabled
# bounds: x1=10 y1=169 x2=90 y2=188
# text: "Channels"
# item 7: TEXT (0x88) disabled
# bounds: x1=12 y1=192 x2=68 y2=216
# text: "Period"
# item 8: TEXT (0x88) disabled
# bounds: x1=7 y1=218 x2=82 y2=241
# text: "Resolution"
# item 9: TEXT (0x88) disabled
# bounds: x1=8 y1=272 x2=69 y2=297
# text: "Samples"
# item 10: BUTTON (0x04) enabled
# bounds: x1=194 y1=31 x2=256 y2=54
# text: "update"
# item 11: TEXT (0x88) disabled
# bounds: x1=165 y1=192 x2=261 y2=216
# text: "microseconds"
# item 12: TEXT (0x88) disabled
# bounds: x1=105 y1=26 x2=169 y2=46
# text: "^"
# item 13: TEXT (0x88) disabled
# bounds: x1=90 y1=168 x2=161 y2=188
# text: "^"
# item 14: TEXT (0x88) disabled
# bounds: x1=68 y1=192 x2=164 y2=216
# text: "^"
# item 15: TEXT (0x88) disabled
# bounds: x1=81 y1=219 x2=155 y2=240
# text: "16000000"
# item 16: TEXT (0x88) disabled
# bounds: x1=75 y1=271 x2=168 y2=297
# text: "^"
# item 17: TEXT (0x88) disabled
# bounds: x1=17 y1=79 x2=94 y2=99
# text: ""
# item 18: TEXT (0x88) disabled
# bounds: x1=166 y1=79 x2=246 y2=99
# text: ""
# item 19: TEXT (0x88) disabled
# bounds: x1=17 y1=100 x2=94 y2=120
# text: ""
# item 20: TEXT (0x88) disabled
# bounds: x1=166 y1=100 x2=237 y2=120
# text: ""
# item 21: TEXT (0x88) disabled
# bounds: x1=17 y1=122 x2=96 y2=142
# text: ""
# item 22: TEXT (0x88) disabled
# bounds: x1=166 y1=122 x2=245 y2=142
# text: ""
# item 23: TEXT (0x88) disabled
# bounds: x1=17 y1=144 x2=98 y2=164
# text: " "
# item 24: TEXT (0x88) disabled
# bounds: x1=166 y1=144 x2=243 y2=164
# text: " "
# item 25: TEXT (0x88) disabled
# bounds: x1=123 y1=247 x2=165 y2=266
# text: "3500"
# item 26: TEXT (0x88) disabled
# bounds: x1=233 y1=219 x2=265 y2=238
# text: "122"
# item 27: TEXT (0x88) disabled
# bounds: x1=215 y1=170 x2=262 y2=188
# text: "mode"
# item 28: TEXT (0x88) disabled
# bounds: x1=14 y1=247 x2=117 y2=266
# text: "Test code"
# item 29: TEXT (0x88) disabled
# bounds: x1=164 y1=219 x2=234 y2=238
# text: "Digital I/O"
# item 30: TEXT (0x88) disabled
# bounds: x1=169 y1=170 x2=213 y2=188
# text: "Mode"
DITL_3012.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=12 y1=74 x2=82 y2=92
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=114 y1=74 x2=184 y2=92
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=12 y1=12 x2=184 y2=28
# text: "Save as:"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=209 y1=16 x2=295 y2=34
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=217 y1=74 x2=287 y2=92
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=217 y1=101 x2=287 y2=119
# text: "Drive"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=14 y1=34 x2=182 y2=50
# text: ""
# item 7: CUSTOM (0x80) disabled
# bounds: x1=200 y1=16 x2=201 y2=88
# data: ""
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=111 y1=122 x2=200 y2=142
# text: "Text Only"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=9 y1=122 x2=106 y2=142
# text: "SmadChrom"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=203 y1=122 x2=275 y2=142
# text: "Igor‚Ñ¢"
# item 11: TEXT (0x88) disabled
# bounds: x1=200 y1=36 x2=303 y2=56
# text: "free?"
# item 12: BUTTON (0x04) enabled
# bounds: x1=10 y1=101 x2=126 y2=119
# text: "Add Comments"
DITL_3013.txt
# 30 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=185 y1=283 x2=245 y2=311
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=177 y1=197 x2=250 y2=225
# text: "Cancel ‚åò."
# item 2: RADIO_BUTTON (0x06) enabled
# bounds: x1=3 y1=156 x2=89 y2=196
# text: "Fill peaks\n with"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=3 y1=116 x2=167 y2=136
# text: "Show the baseline"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=3 y1=96 x2=199 y2=116
# text: "Begin and End peak marks"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=6 y1=54 x2=78 y2=74
# text: "Amount"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=163 y1=30 x2=243 y2=50
# text: "Number"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=91 y1=54 x2=150 y2=74
# text: "Time"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=163 y1=54 x2=230 y2=74
# text: "Name"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=92 y1=75 x2=228 y2=95
# text: "Draw at an angle"
# item 10: TEXT (0x88) disabled
# bounds: x1=61 y1=136 x2=91 y2=156
# text: "Or"
# item 11: TEXT (0x88) disabled
# bounds: x1=37 y1=4 x2=237 y2=24
# text: "If a valid report is available"
# item 12: TEXT (0x88) disabled
# bounds: x1=4 y1=31 x2=161 y2=49
# text: "Mark each Peak with:-"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=92 y1=156 x2=172 y2=176
# text: "patterns"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=92 y1=176 x2=172 y2=196
# text: "colours"
# item 15: TEXT (0x88) disabled
# bounds: x1=1 y1=205 x2=63 y2=222
# text: "Channel"
# item 16: TEXT (0x88) disabled
# bounds: x1=6 y1=241 x2=23 y2=258
# text: "0"
# item 17: TEXT (0x88) disabled
# bounds: x1=6 y1=260 x2=23 y2=277
# text: "1"
# item 18: TEXT (0x88) disabled
# bounds: x1=6 y1=279 x2=23 y2=296
# text: "2"
# item 19: TEXT (0x88) disabled
# bounds: x1=6 y1=298 x2=23 y2=315
# text: "3"
# item 20: CUSTOM (0x00) enabled
# bounds: x1=24 y1=241 x2=176 y2=317
# data: ""
# item 21: TEXT (0x88) disabled
# bounds: x1=81 y1=208 x2=126 y2=226
# text: "Peak"
# item 22: TEXT (0x88) disabled
# bounds: x1=30 y1=223 x2=49 y2=240
# text: "1"
# item 23: TEXT (0x88) disabled
# bounds: x1=49 y1=223 x2=68 y2=240
# text: "2"
# item 24: TEXT (0x88) disabled
# bounds: x1=67 y1=223 x2=86 y2=240
# text: "3"
# item 25: TEXT (0x88) disabled
# bounds: x1=85 y1=223 x2=104 y2=240
# text: "4"
# item 26: TEXT (0x88) disabled
# bounds: x1=103 y1=223 x2=122 y2=240
# text: "5"
# item 27: TEXT (0x88) disabled
# bounds: x1=121 y1=223 x2=140 y2=240
# text: "6"
# item 28: TEXT (0x88) disabled
# bounds: x1=140 y1=223 x2=159 y2=240
# text: "7"
# item 29: TEXT (0x88) disabled
# bounds: x1=157 y1=223 x2=176 y2=240
# text: "8"
DITL_3014.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=242 y1=167 x2=302 y2=187
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=216 y1=167 x2=259 y2=188
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=4 y1=65 x2=106 y2=85
# text: " Line thickness"
# item 3: TEXT (0x88) disabled
# bounds: x1=8 y1=4 x2=303 y2=30
# text: "Plot settings for Printing and the Clipboard"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=112 y1=63 x2=174 y2=87
# text: "1/72\""
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=63 x2=241 y2=88
# text: "1/150\""
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=241 y1=63 x2=307 y2=88
# text: "1/300\""
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=113 x2=301 y2=133
# text: "Add short report to the printed plot"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=176 x2=74 y2=196
# text: "Colour"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=92 x2=251 y2=112
# text: "High resolution clipboard (X4)"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=155 x2=165 y2=175
# text: "Include Y scale"
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=127 y1=36 x2=229 y2=57
# text: ""
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=4 y1=134 x2=300 y2=154
# text: "Add short report to the clipboard plot"
# item 13: TEXT (0x88) disabled
# bounds: x1=236 y1=37 x2=311 y2=55
# text: "Minutes"
# item 14: TEXT (0x88) disabled
# bounds: x1=3 y1=36 x2=121 y2=56
# text: "Start Page one at"
DITL_3015.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=201 y1=270 x2=275 y2=296
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=129 y1=270 x2=189 y2=290
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=57 y1=2 x2=239 y2=24
# text: "Smadchrome Information"
# item 3: TEXT (0x88) disabled
# bounds: x1=81 y1=163 x2=176 y2=187
# text: "Free memory"
# item 4: TEXT (0x88) disabled
# bounds: x1=31 y1=26 x2=260 y2=45
# text: "Data input Range(mv) & %Offset"
# item 5: TEXT (0x88) disabled
# bounds: x1=4 y1=111 x2=87 y2=134
# text: "Acquired on"
# item 6: TEXT (0x88) disabled
# bounds: x1=16 y1=187 x2=176 y2=211
# text: "Maximum sample space"
# item 7: TEXT (0x88) disabled
# bounds: x1=56 y1=211 x2=176 y2=235
# text: "Set sample space"
# item 8: TEXT (0x88) disabled
# bounds: x1=48 y1=235 x2=176 y2=259
# text: "Sample space used"
# item 9: TEXT (0x88) disabled
# bounds: x1=30 y1=48 x2=140 y2=71
# text: "^"
# item 10: TEXT (0x88) disabled
# bounds: x1=166 y1=48 x2=276 y2=71
# text: "^"
# item 11: TEXT (0x88) disabled
# bounds: x1=30 y1=80 x2=140 y2=100
# text: "^"
# item 12: TEXT (0x88) disabled
# bounds: x1=166 y1=80 x2=276 y2=100
# text: "^"
# item 13: TEXT (0x88) disabled
# bounds: x1=176 y1=186 x2=279 y2=211
# text: "^"
# item 14: TEXT (0x88) disabled
# bounds: x1=176 y1=211 x2=272 y2=235
# text: "^"
# item 15: TEXT (0x88) disabled
# bounds: x1=176 y1=235 x2=272 y2=259
# text: "^"
# item 16: TEXT (0x88) disabled
# bounds: x1=90 y1=142 x2=148 y2=165
# text: "^"
# item 17: TEXT (0x88) disabled
# bounds: x1=91 y1=112 x2=282 y2=133
# text: "^"
# item 18: TEXT (0x88) disabled
# bounds: x1=176 y1=163 x2=275 y2=187
# text: "1000111"
# item 19: TEXT (0x88) disabled
# bounds: x1=183 y1=144 x2=225 y2=164
# text: "Bytes"
# item 20: TEXT (0x88) disabled
# bounds: x1=10 y1=142 x2=88 y2=164
# text: "File Version"
# item 21: BUTTON (0x04) enabled
# bounds: x1=12 y1=267 x2=110 y2=294
# text: "Interface info"
DITL_3016.txt
# 1 entries
# item 0: TEXT (0x88) disabled
# bounds: x1=2 y1=1 x2=264 y2=33
# text: ""
DITL_3017.txt
# 28 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=399 y1=245 x2=468 y2=265
# text: "Ok"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=388 y1=245 x2=438 y2=267
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=418 y1=51 x2=477 y2=71
# text: "Minutes"
# item 3: BUTTON (0x04) enabled
# bounds: x1=251 y1=245 x2=346 y2=265
# text: "Delete row"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=5 y1=52 x2=60 y2=72
# text: "None"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=60 y1=52 x2=136 y2=72
# text: "Internal"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=138 y1=52 x2=215 y2=72
# text: "External"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=217 y1=52 x2=283 y2=71
# text: "Names"
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=120 y1=82 x2=221 y2=102
# text: "0"
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=346 y1=84 x2=465 y2=104
# text: "%"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=26 y1=22 x2=59 y2=42
# text: "0"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=60 y1=22 x2=91 y2=42
# text: "1"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=91 y1=22 x2=122 y2=42
# text: "2"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=125 y1=22 x2=160 y2=42
# text: "3"
# item 14: BUTTON (0x04) enabled
# bounds: x1=212 y1=23 x2=336 y2=47
# text: "Copy to Clipboard"
# item 15: BUTTON (0x04) enabled
# bounds: x1=339 y1=23 x2=483 y2=47
# text: "Paste from Clipboard"
# item 16: BUTTON (0x04) enabled
# bounds: x1=6 y1=245 x2=232 y2=265
# text: "Append report to Standards list"
# item 17: TEXT (0x88) disabled
# bounds: x1=387 y1=115 x2=464 y2=138
# text: " Area (Ht)"
# item 18: CUSTOM (0x80) disabled
# bounds: x1=5 y1=143 x2=468 y2=239
# data: ""
# item 19: TEXT (0x88) disabled
# bounds: x1=339 y1=51 x2=416 y2=71
# text: "Time units="
# item 20: TEXT (0x88) disabled
# bounds: x1=81 y1=115 x2=158 y2=138
# text: "Peak time"
# item 21: TEXT (0x88) disabled
# bounds: x1=159 y1=115 x2=236 y2=138
# text: " Amount"
# item 22: TEXT (0x88) disabled
# bounds: x1=5 y1=74 x2=117 y2=106
# text: "Time correction\nto Std. time"
# item 23: TEXT (0x88) disabled
# bounds: x1=237 y1=115 x2=309 y2=138
# text: " Identity"
# item 24: TEXT (0x88) disabled
# bounds: x1=5 y1=2 x2=213 y2=23
# text: "\'Standards\' setup for channel:-"
# item 25: TEXT (0x88) disabled
# bounds: x1=265 y1=83 x2=342 y2=104
# text: "Conc. units"
# item 26: TEXT (0x88) disabled
# bounds: x1=10 y1=111 x2=76 y2=142
# text: "Standard Number"
# item 27: TEXT (0x88) disabled
# bounds: x1=307 y1=115 x2=382 y2=138
# text: " R.F."
DITL_3018.txt
# 14 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=228 y1=174 x2=292 y2=199
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=134 y1=181 x2=194 y2=201
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=93 y1=3 x2=205 y2=24
# text: "General options"
# item 3: TEXT (0x88) disabled
# bounds: x1=7 y1=25 x2=221 y2=59
# text: "File Creator for the Text Report\n(this MUST be Four characters)"
# item 4: TEXT (0x88) disabled
# bounds: x1=0 y1=63 x2=71 y2=83
# text: "Time units"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=226 y1=34 x2=272 y2=54
# text: "MSWD"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=70 y1=61 x2=157 y2=83
# text: "Automatic"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=156 y1=60 x2=230 y2=83
# text: "Minutes"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=230 y1=60 x2=303 y2=83
# text: "Seconds"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=104 x2=219 y2=124
# text: "Use Volts for Intensity scale"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=86 x2=147 y2=104
# text: "Add grid to plot"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=124 x2=167 y2=142
# text: "Read TEXT data files"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=158 x2=220 y2=176
# text: "Always warn if data unsaved"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=2 y1=141 x2=292 y2=159
# text: "Auto generate report on open & stop"
DITL_3019.txt
# 9 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=209 y1=53 x2=278 y2=80
# text: "Save"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=214 y1=57 x2=274 y2=77
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=18 y1=1 x2=194 y2=21
# text: "Save data over the RANGE"
# item 3: TEXT (0x88) disabled
# bounds: x1=209 y1=23 x2=275 y2=43
# text: "Minutes"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=7 y1=25 x2=79 y2=45
# text: "2"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=113 y1=25 x2=199 y2=45
# text: "3600"
# item 6: TEXT (0x88) disabled
# bounds: x1=87 y1=24 x2=107 y2=48
# text: "to"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=4 y1=58 x2=106 y2=78
# text: "No units or"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=109 y1=58 x2=195 y2=78
# text: "millivolts"
DITL_3020.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=177 y1=37 x2=235 y2=57
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=170 y1=26 x2=202 y2=58
# data: ""
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=22 x2=155 y2=38
# text: "baseline markers"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=43 x2=146 y2=61
# text: "peak markers"
# item 4: TEXT (0x88) disabled
# bounds: x1=33 y1=1 x2=209 y2=18
# text: "Paste from the clipboard:"
DITL_3021.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=222 y1=42 x2=280 y2=62
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=182 y1=44 x2=214 y2=76
# data: ""
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=3 y1=7 x2=152 y2=27
# text: "Copy the baseline"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=3 y1=38 x2=188 y2=54
# text: "Copy the peak markers"
# item 4: TEXT (0x88) disabled
# bounds: x1=177 y1=17 x2=288 y2=37
# text: "to the clipboard "
DITL_3022.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=314 y1=58 x2=378 y2=82
# text: "Set scale"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=317 y1=63 x2=351 y2=83
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=10 y1=51 x2=110 y2=70
# text: "Plot data from"
# item 3: TEXT (0x88) disabled
# bounds: x1=197 y1=52 x2=217 y2=72
# text: "to"
# item 4: TEXT (0x88) disabled
# bounds: x1=22 y1=26 x2=110 y2=46
# text: "Input Range"
# item 5: TEXT (0x88) disabled
# bounds: x1=197 y1=26 x2=217 y2=46
# text: "to"
# item 6: TEXT (0x88) disabled
# bounds: x1=301 y1=34 x2=379 y2=53
# text: "%FS"
# item 7: TEXT (0x88) disabled
# bounds: x1=112 y1=26 x2=193 y2=46
# text: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=216 y1=25 x2=295 y2=45
# text: ""
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=112 y1=52 x2=193 y2=72
# text: ""
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=216 y1=52 x2=295 y2=72
# text: ""
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=14 y1=4 x2=86 y2=23
# text: "Volts or"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=87 y1=4 x2=238 y2=23
# text: "% Scale for Channel"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=242 y1=3 x2=271 y2=23
# text: "0"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=271 y1=3 x2=300 y2=23
# text: "1"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=300 y1=3 x2=329 y2=23
# text: "2"
# item 16: RADIO_BUTTON (0x06) enabled
# bounds: x1=329 y1=3 x2=358 y2=23
# text: "3"
DITL_3027.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=329 y1=213 x2=404 y2=238
# text: "Set values"
# item 1: BUTTON (0x04) enabled
# bounds: x1=4 y1=216 x2=79 y2=239
# text: "Cancel ‚åò."
# item 2: TEXT (0x88) disabled
# bounds: x1=3 y1=59 x2=63 y2=77
# text: "Channel"
# item 3: TEXT (0x88) disabled
# bounds: x1=59 y1=0 x2=357 y2=19
# text: "Acquisition Parameters for SMAD][ interface"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=59 y1=169 x2=144 y2=189
# text: "16 bits or"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=150 y1=169 x2=293 y2=189
# text: "21 bits resolution"
# item 6: TEXT (0x88) disabled
# bounds: x1=343 y1=24 x2=408 y2=44
# text: "Minutes"
# item 7: CUSTOM (0x80) disabled
# bounds: x1=375 y1=204 x2=409 y2=225
# data: ""
# item 8: TEXT (0x88) disabled
# bounds: x1=136 y1=24 x2=275 y2=44
# text: "/second/channel for"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=7 y1=94 x2=38 y2=111
# text: "0"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=7 y1=112 x2=38 y2=128
# text: "1"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=7 y1=130 x2=38 y2=146
# text: "2"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=7 y1=148 x2=38 y2=164
# text: "3"
# item 13: CUSTOM (0x00) enabled
# bounds: x1=44 y1=94 x2=334 y2=164
# data: ""
# item 14: TEXT (0x88) disabled
# bounds: x1=338 y1=59 x2=415 y2=77
# text: "Scale (mv)"
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=278 y1=24 x2=339 y2=45
# text: "1000.000"
# item 16: RADIO_BUTTON (0x06) enabled
# bounds: x1=224 y1=193 x2=345 y2=213
# text: "External start"
# item 17: RADIO_BUTTON (0x06) enabled
# bounds: x1=59 y1=193 x2=223 y2=213
# text: "Start from computer"
# item 18: TEXT (0x88) disabled
# bounds: x1=172 y1=61 x2=212 y2=77
# text: "Gain"
# item 19: CUSTOM (0x00) enabled
# bounds: x1=69 y1=24 x2=135 y2=44
# data: ""
# item 20: TEXT (0x88) disabled
# bounds: x1=1 y1=25 x2=68 y2=44
# text: "Sample at"
# item 21: TEXT (0x88) disabled
# bounds: x1=82 y1=211 x2=322 y2=241
# text: ""
DITL_3028.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=197 y1=62 x2=244 y2=88
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=188 y1=64 x2=238 y2=87
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=7 y1=2 x2=242 y2=22
# text: "SMAD][ Interface Hardware Options"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=6 y1=54 x2=192 y2=101
# text: "Use Hardware Flow\ncontrol on the Serial Port"
# item 4: TEXT (0x88) disabled
# bounds: x1=11 y1=23 x2=188 y2=58
# text: "Delay factor (1-15000).\n 15000= maximum speed."
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=193 y1=31 x2=244 y2=48
# text: "17"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=111 y1=98 x2=232 y2=120
# text: ""
# item 7: TEXT (0x88) disabled
# bounds: x1=6 y1=92 x2=100 y2=126
# text: "Clock out period(µsecs)"
DITL_3029.txt
# 1 entries
# item 0: PICTURE (0xC0) disabled
# bounds: x1=3 y1=1 x2=340 y2=169
# PICT resource ID: 3004
DITL_3030.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=243 y1=109 x2=301 y2=129
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=233 y1=90 x2=277 y2=108
# data: ""
# item 2: TEXT (0x88) disabled
# bounds: x1=3 y1=3 x2=307 y2=21
# text: "For more information and Ordering contact :-"
# item 3: TEXT (0x88) disabled
# bounds: x1=63 y1=20 x2=247 y2=38
# text: "MorganKennedy Research,"
# item 4: TEXT (0x88) disabled
# bounds: x1=4 y1=134 x2=304 y2=152
# text: "Email Eric Kennedy: SMAD@hunterlink.net.au "